Sunday, December 18, 2016

How to enter Unicode characters in Microsoft Windows

Summary

A small utility called UnicodeInput helps with entering these characters.
This is how to enter any Unicode character in Microsoft Windows.
There are definitely other (more efficient) ways to do it, but this should work in a pinch.
Tested on Windows 10 Pro x64.

Detail

Method 1: Universal

This method works regardless of any of your language settings, but is the most cumbersome to type.
  1. Press and hold down the Alt key.
  2. Press the + (plus) key on the numeric keypad.
  3. Type the hexidecimal unicode value.
  4. Release the Alt key.
Alas, this appears to require a registry setting. It was already set on my computer, but some readers report that this method didn't work for them, and this is probably why. If you don't know what the registry is, please don't try this. Under HKEY_Current_User/Control Panel/Input Method, set EnableHexNumpad to "1". If you have to add it, set the type to be REG_SZ.

Method 2: Input-language Specific

This method depends on the specific input language you are using.
  1. Press and hold down the Alt key.
  2. Type 0 (zero) and the decimal unicode value on the numeric keypad.
  3. Release the Alt key.
You can see which input language you are using (and which are installed) by:
  1. Start Menu
  2. Settings
  3. Control Panel
  4. Regional and Language Options
  5. Languages tab
  6. Detail button
The entries in the Unicode character information section are using the Windows Latin 1 input language.

Method 3: Code-page Specific

This method depends on the specific code page you have installed.
  1. Press and hold down the Alt key.
  2. Type the decimal codepage value on the numeric keypad. Do not type any leading zeros.
  3. Release the Alt key.
You can see which code page you have by typing chcp at a command prompt. Check the grid for your code page from the list of known code pages to see what characters you can enter this way.
The entries in the Unicode character information section are using code page 437.

Method 4: Application-specific

Applications can support their own methods. These are not standardized.
Several Microsoft applications, including WordPad and Microsoft Word:
press Alt-X after typing some hex digits. You see the digits as you type them, and they're replaced by the Unicode equivalent. Pressing Alt-X again converts it back to numbers.

Method 5: Unicode IME

Microsoft has a Unicode Input Method ?Editor? that works the same way my UnicodeInput pop-up does, but with LeftAlt Shift as the trigger key.
Michael Kaplan, a Microsoft i18n guru, has the details on how the Unicode IME works. Some notes to fill in some details that he assumes:
  • Go into Control Panel -> Regional Settings, on the languages tab, enable support for East Asian languages. This takes 230 MB of disk space and a restart.
  • Go back into Control Panel -> Regional Settings, on the languages tab, press the Details button.
  • Add Chinese (Taiwan) (Others would probably work too) and choose Chinese (Traditional) - Unicode.
  • You will now have an extra do-hickey in the taskbar showing which language you're in.
  • Press LeftAlt Shift to switch into the IME (taskbar shows CH).
  • Type the hex digits of the Unicode character. As soon as you type the last one, it is sent to the application.
  • Press LeftAlt Shift to switch out of the IME (taskbar shows your original language code).

Tips

  • Fonts - you must have a font that contains the character. It seems obvious, but Windows can't display characters it doesn't know about. Often, you will need to select the font yourself, since only a few applications are smart enough to switch fonts automatically.
  • WordPad - works, but you have to have it set to a font that contains the character. Method 4 ([hex][AltX]) seems to switch to an appropriate font automatically.
  • Notepad - generally doesn't work since its font doesn't support many characters.
  • Internet Explorer - in the URL bar, the universal method doesn't work if it has A-F, since it opens the menu (i.e. Alt-F opens the File menu).
  • Mozilla Firebird - works correctly (if you have a font that supports it). Note that if you type it on a page that is is using a charset that doesn't support it, it will not be transmitted to the website correctly.

References

  • The Alt+NumPad entry in Microsoft's Global Windows Glossary
  • Windows XP docs that inexcusably don't mention the universal variation.
  • Discussion on GeorgeHernandez.com (search for "2005-04-24") - discussion of the various problems with someone who did some real work to figure out what works and doesn't. He also has a Unicode shortcuts page that summarizes his findings (quite similar to this page, but with more detail).
  • Wikipedia article Unicode_input with some Mac and Linux tips.

Friday, December 16, 2016

Add OEM Information and Logo in System Properties and Settings Page in Windows

Computer manufacturers usually include their OEM brand info and logo in System Properties applet when preinstalling Windows. This article tells you how to add or modify the custom OEM information strings in the System Properties window in Windows Vista, 7, 8 and Windows 10. In Windows 10, the custom strings are shown in the modern Settings app (About your PC page) as well.

Add OEM Information and Logo in System Properties

1. Click Start, type regedit.exe and press ENTER
2. Navigate to the following location
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\OEMInformation
If the OEMInformation key is missing, you’ll need to create one manually.
3. Create string values (REG_SZ) and add matching data, as per the table below:
Value nameDataValue type
Logo{Path to your logo file}*REG_SZ
Manufacturer{System manufacturer name}REG_SZ
Model{System Model number}REG_SZ
SupportHours{Support hours}REG_SZ
SupportPhone{OEM Support Phone number}REG_SZ
SupportURL{OEM Support URL}REG_SZ
4. Exit Registry Editor.
* Note: The logo should be a BMP file with the dimension of 120×120. Logos larger than 120×120 pixels are scaled to 120×120. Place the file in the C:\Windows\System32\ folder and name it OEMlogo.bmp

You can also create a OEMInfo.reg file with the following contents
Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\OEMInformation]
"SupportHours"="Monday-Friday: 7:00 a.m. to 7:00 p.m. (CST)"
"SupportURL"="http://www.dell.com/support/contents/us/en/19/Category/Product-Support/Dell-Subsidiaries/alienware-support-site/?~ck=mn"
"SupportPhone"="1-800-624-9897"
"Manufacturer"="Alienware"
"Logo"="C:\\Windows\\System32\\OEMlogo.bmp"
"Model"="Aurora R5"



Change the data as appropriate for your system. Save it and by double clicking on it, it will offer to add it to the registry for you.
* Note: The file path to the logo must be entered with double back-slashes or it will be ignored by the Registry.

Sample

I’ve customized the support information page by populating it with sample entries. Here is the screenshot:


And the related registry entries.

Windows 10 – System Settings (About) Page

This also works in Windows 10. In Windows 10, the OEM information would be displayed in the classic System information applet as well as in the modern System Settings > System > About page.

For illustration, I used this settings (in the same key as above).

And this is how it appears in the Settings > System > About page.



However, since the Windows 10 Anniversary Update (v1607), OEM logo is ignored and not displayed in the Settings page.



Monday, December 12, 2016

Kingston HyperX Savage USB Flash Drive HXS3/64GB

I recently purchased this drive as an impulse item on Amazon on checkout. Can never have too many USB drives, especially High Speed ones.

The drive came with a small loop to attach to a lanyard and nothing else.

Here is a quick test on an Alienware Aurora R5 using the top panel USB 3.0 port

System Config


  • System:  Alienware R5
  • CPU:     Intel i7-6700K @ 4.0GHz
  • RAM:     32GB 2100 RAM
  • Video:   NVIDIA GTX 1080 FE
  • Boot:    PC300 NVMe SK hynix 512GB SSD
  • Scratch: Smamsung 840 EVO 128GB SSD
  • Data:    WD Black 7200rpm 6TB HD


Crystal DiskMark 5.2.0 x64

Saturday, December 10, 2016

Windows Version GUI

To find out your version of Windows

  • Click Start or press the Windows button on your Keyboard
  • Type winver
  • Press Enter

How To Remove Duplicate OneDrive Entry

To resolve your concern regarding duplicated OneDrive entry, follow the steps below:
  1. Search for regedit, and then press Enter.
  2.  Select HKEY_CURRENT_USER.
  3.  Go to SOFTWARE.
  4.  Click on Microsoft.
  5.  Select Windows.
  6.  Go to CurrentVersion.
  7.  Click on Explorer.
  8.  Select Desktop.
  9.  Click on NameSpace.
  10.  Check if you have several folders under NameSpace.
  11.  If there are several folders, highlight each folder, and then check the name of the Data on the right hand side.
     12. If you see multiple folders with OneDrive as the Data, right click on it, and then select Delete.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, refer to the following Microsoft Knowledge Base article.

How to Migrate Office 2013 or 2016 to new computer

This is the process.
  1. Install Office 2013 or 2016 on the new computer.
  2. Run windows updates
  3. Make sure both computers are not currently in Outlook
  4. Copy the entire outlook data folder to your new computer.  I am not providing directions for this.  You should know what your doing here (or use google).
  5. Now you will have a copy of outlook data (PST’s) in both locations.
  6. Copy over any internet shared calendars from your old machine to the new machine.  File location is here, and it would be sitting in the root if it exists:
    • C:\Users\{username}\AppData\Local\Microsoft\Outlook
  7. On your old machine run REGEDIT.  EXPORT this entire key which contains all your email account settings.
    • HKEY_CURRENT_USER\SOFTWARE\Microsoft\Office\16.0\Outlook\Profiles\Outlook
    • Note: If you are on a different version of outlook the version 16.0 will be a different number.
  8. Copy that REG file to your new PC and double click and let it insert it into the registry
  9. Move over any signatures from your old computer to your new computer.  Those are located here:
    • C:\Users\{username}\AppData\Roaming\Microsoft\Signatures
    • Note: You probably should just copy the entire folder and paste it in the same place on your new PC.
  10. Launch Outlook on the new PC.  Pick your profile and set as default.  Then go update each accounts’ passwords.  Once you update the passwords you will be able to resume doing email exactly as you were doing it on the old PC.

Saturday, January 02, 2016

General Dynamics MUOS-Manpack PRC-155 Radio

General Dynamics Simultaneously Connects Personnel At Three U.S. Army Installations Using MUOS-Manpack PRC-155 Radio And MUOS Satellite Communications System

October 15, 2014


General Dynamics employees demonstrate MUOS connectivity using the PRC-155 Manpack Radio to MG Bo Dyess and BG John W. Charlton at Ft. Bliss, Texas.


Spanning thousands of miles, the MUOS satellite and PRC-155 Manpack radio test validates a priority capability for the U.S. Army’s global tactical network.

SCOTTSDALE, Ariz., Oct. 15, 2014 — General Dynamics C4 Systems successfully completed a series of radio-call tests using the AN/PRC-155 two-channel Manpack radios and the Mobile User Objective System (MUOS) satellite communications (SATCOM) system to connect General Dynamics’ personnel located at Fort Bliss, Texas, Fort Benning, Ga., and Fort Bragg, N.C., with the company’s facility in Scottsdale, Ariz. The radio tests validated that personnel using AN/PRC-154A Rifleman and legacy SINCGARS radios could connect with the PRC-155 MUOS-Manpack radio to access the MUOS SATCOM system. Test participants could talk to one another while hearing their voices with cellphone-like clarity. The test also included making conference calls connecting multiple participants at different locations, a thousand miles apart.


General Dynamics Employee Rick Murphy, in Fort Bliss, talks on the PRC-155 Manpack Radio over the MUOS waveform with colleagues in Scottsdale, Ariz.


Chris Marzilli, president of General Dynamics C4 Systems, said, “The PRC-155 MUOS-Manpack radio is the only tactical radio to successfully connect and sustain voice and data communications using the MUOS satellite communications system. With the success of this test, the PRC-155 continues to deliver on the promise of the Army’s tactical network- keeping soldiers informed and aware, from the most isolated foxhole to the Pentagon and back.”

Funded by General Dynamics, the multi-site MUOS radio test included a number of realistic Army operations where a dismounted soldier, or group of soldiers, would need to contact commanders and other personnel located hundreds or thousands of miles away. Test scenarios used one or both MUOS satellites and included:

  • Person-to-person radio calls;
  • Group conference calls connecting multiple participants located at geographically dispersed locations;
  • Mobile and stationary mission environments; and
  • The combined use of MUOS, SRW and legacy SINCGARS radio communication waveforms for each test.
Each test began with a radio call from a PRC-154A Rifleman or legacy SINCGARS radio using Soldier Radio Waveform (SRW) of legacy waveform. The outgoing call was received on one of two MUOS Manpack radio channels. In a fraction of a second, the MUOS-Manpack radio bridged the outgoing call to the second Manpack radio channel, converted the call into the MUOS waveform transmitting it directly to the MUOS satellite, down to the MUOS ground station, up to the second MUOS satellite and down to the Manpack radio receiving the incoming call on one channel and switching it back into the legacy or SRW waveform, routing the call to the intended recipient using the second channel in the MUOS-Manpack radio.

“With the PRC-155 radio, soldiers and special operators can stay in touch with headquarters, from anywhere on Earth, anytime,” said retired U.S. Army General Scott Wallace, former commander of the U.S. Army Training and Doctrine Command and a consultant for General Dynamics. “The cellphone-like clarity demonstrated during each call, the communications consistency and ability to use different radios, with the PRC-155 MUOS Manpack radio acting as the communications bridge to the MUOS satellite communications system, is a significant step forward in placing the full power of the Army’s tactical network in the hands of soldiers.”

The MUOS satellite communications system offers smartphone-quality voice communications and more than 10-times the data capacity of the legacy UHF satellite communications system. To connect to the MUOS satellite system, radios, like the PRC-155, must have the MUOS communications waveform that is based on commercial cellular networks technologies.

A part of General Dynamics’ Soldier’s Network, WIN-T Increment 2, the AN/PRC-155 Manpack and AN/PRC-154A Rifleman tactical networking radios work together with the company’s cyber-defense devices including the TACLANE® family of in-line encryption devices and TACLANE MultiBook secure laptop computer. For more information about the Soldier’s Network and tactical radios, visit www.thesoldiersnetwork.com.

Media Contact: Carol Smith
General Dynamics C4 Systems
office: 480-441-0342
cell: 480-734-5922
email: carol.smith@gdc4s.com

Tuesday, December 22, 2015

How to install Dig on a Windows 10, 8.1, 8, 7 64-bit system

This installation procedure will extract only  relevant libraries and executables from the BIND 9 package, and not install a full-blown DNS server.

Head over to http://www.isc.org/downloads/ and download the BIND 9.10.0-P2 package. Select the 64-bit version and leave the 32-bit package as a last resort. The 64-bit version is dependent on the Microsoft Visual C++ Redistributable package, which you can download and install from http://www.microsoft.com/en-us/download/details.aspx?id=30679#

Why is it preferable to go with the 64-bit version of BIND 9 on a Windows 64-bit system, when 32-bit applications work just fine? Since dig is a command line tool there are a few things to take into account. On a Windows 64-bit system, the command line interpreter (cmd.exe) will be running in 64-bit mode. That means it will look for executables under %SystemRoot%\System32\.
The System32 folder, despite its name is designed for 64-bit executables on Windows 64-bit systems.
/**Note: On Windows 32-bit systems, the %SystemRoot%\System32\ folder is indeed for 32-bit executables.*/





The command prompt with its 64 and 32-bit executables.
The correct folder for 32-bit executables on Windows 64-bit systems is %SystemRoot%\SysWOW64\, again ignore the clever naming scheme as WOW64 stands for “Windows (32-bit) on Windows 64-bit”. Anyhow, if you opted to install the 32-bit version of BIND 9 and thus extracted the executables and libraries to %SystemRoot%\SysWOW64, you’ll need to run the 32-bit version of cmd.exe by issuing the command:

%SystemRoot%\SYSWOW64\cmd.exe


The next step is assuming that the package of choice was the 64-bit version of BIND 9, and that the Microsoft Visual C++ Redistributable is already installed. If not, then make adjustments accordingly. Open the BIND9.10.0-P2.x64.zip file and extract the following files to %SystemRoot%\System32\
/**Note: Moving files into the System32 folder requires administrative privileges (run as administrator).*/

dig.exe
host.exe
libbind9.dll
libdns.dll
libeay32.dll
libisc.dll
libisccfg.dll
liblwres.dll
libxml2.dll

Finally, fire up the command prompt and check if the installation was successful by doing a DNS query:

dig isc.org




Dig on Windows 8.1 64-bit

Thursday, November 19, 2015

How to take a screenshot on your Windows 10 Surface device

Here’s our quick-and-easy guide to recording screenshots on your Surface or Surface Book.

Whether it’s sharing a screen from a game, recording an image of your desktop, or snapping a photo of a Skype session, there are many reasons to take screenshots on your Surface. Surprisingly, there are just as many ways to take a screenshot, depending on which Windows 10 Surface device you have.
Surface 3 and Surface Pro 3
Method 1: The fastest way to take a screenshot on your Surface 3 device is to hold down the Windows logo on the front of the device and then push the volume-down button. The screen will dim briefly as the screen is recorded and saved to the Screenshots folder of your Pictures library under “This PC.”
Method 2: If your typecover has a PrtScn key, you can also take a screenshot by holding down the Windows key on your keyboard and pressing PrtScn. The screen will be saved to the Screenshots folder described in Method 1.
Method 3: You can also just press the PrtScn by itself. But instead of saving your screenshot to the Screenshots folder of your Pictures library on “This PC,” it will be saved in the Screenshots folder of your Pictures library on OneDrive.
Screenshot of taking a screenshot on Surface
Method 4: To take a screenshot of just the active window on your screen, hold down the Alt key and press PrtScn. The screen will be saved to OneDrive as described in Method 3.
Method 5: Double-click the top button of your Surface Pen to take a screenshot of your desktop. The full screenshot will be saved in your Screenshots folder on OneDrive, but this method also gives you the option to crop your image immediately.
A greyed-out version of the image will show up on your screen; use your Surface Pen to drag the tip of the pen from one corner of the portion you want to capture to the opposite corner. When you lift the pen tip, your selection appears in a new page in OneNote.
Method 6: There’s a built-in screenshot program in Windows called Snipping Tool that offers more functionality than the above methods. To open, type “Snipping Tool” into Cortana or search the Windows Accessories folder under All Apps.
From within, you can take screenshots of the full desktop, an active window, or just the part you select. You can then save your screen to a place of your choosing as a PNG, GIF, JPEG, or HTML file.
Screenshot of Snipping Tool
Surface Pro 4 and Surface Book 
All of the above methods work for the Surface Pro 4 or Surface Book—but there’s a slight change to Method 1. Since the Windows logo doesn’t appear on the display of these devices, hold the power button down and then press the volume-down button to take a screenshot. The screenshot will be saved in the Screenshots folder under “This PC.”
By the way, this method can be used on your Surface Book whether the keyboard is attached or detached.

Friday, April 17, 2015

50 States Road Trip

With the help of a sophisticated algorithm, this road trip allows you to start in any state. Just hop on at the point that runs through your state and keep going until you’re back at your starting point!




Here is the list of the landmarks you’d stop at in each state on this road trip:
1. Grand Canyon, AZ
2. Bryce Canyon National Park, UT
3. Craters of the Moon National Monument, ID
4. Yellowstone National Park, WY
5. Pikes Peak, CO
6. Carlsbad Caverns National Park, NM
7. The Alamo, TX
8. The Platt Historic District, OK
9. Toltec Mounds, AR
10. Elvis Presley’s Graceland, TN
11. Vicksburg National Military Park, MS
12. French Quarter, New Orleans, LA
13. USS Alabama, AL
14. Cape Canaveral Air Force Station, FL
15. Okefenokee Swamp Park, GA
16. Fort Sumter National Monument, SC
17. Lost World Caverns, WV
18. Wright Brothers National Memorial Visitor Center, NC
19. Mount Vernon, VA
20. White House, Washington, DC
21. Colonial Annapolis Historic District, MD
22. New Castle Historic District, Delaware
23. Cape May Historic District, NJ
24. Liberty Bell, PA
25. Statue of Liberty, NY
26. The Mark Twain House & Museum, CT
27. The Breakers, RI
28. USS Constitution, MA
29. Acadia National Park, ME
30. Mount Washington Hotel, NH
31. Shelburne Farms, VT
32. Fox Theater, Detroit, MI
33. Spring Grove Cemetery, OH
34. Mammoth Cave National Park, KY
35. West Baden Springs Hotel, IN
36. Abraham Lincoln’s Home, IL
37. Gateway Arch, MO
38. C. W. Parker Carousel Museum, KS
39. Terrace Hill Governor’s Mansion, IA
40. Taliesin, WI
41. Fort Snelling, MN
42. Ashfall Fossil Bed, NE
43. Mount Rushmore, SD
44. Fort Union Trading Post, ND
45. Glacier National Park, MT
46. Hanford Site, WA
47. Columbia River Highway, OR
48. San Francisco Cable Cars, CA
49. San Andreas Fault, CA
50. Hoover Dam, NV

US Landmarks Map


US Major Cities Map

Friday, February 13, 2015

Speeding Up RAID Operations on Synology NAS


There are a few things you can do to speed up the process of RAID operations, SSH to your NAS as admin and enter the following commands (change md3 to your device):

# echo 100000 > /proc/sys/dev/raid/speed_limit_min
# echo 32768 > /sys/block/md3/md/stripe_cache_size

The first command increases the minimum “goal” rebuild speeds for when there’s non-rebuild activity. 

The second command increases the stripe cache size which increases sync performance by allowing a larger cache to synchronise the read and write operations on the array.  This is only available for RAID 5 volumes and it does decrease the amount of available system RAM but I never saw 100% utilisation on the DiskStation.

You can monitor the process with the following commands:

# cat /proc/mdstat
# cat /sys/block/md5/md/stripe_cache_size
# cat /proc/sys/dev/raid/speed_limit_min
It also works for speeding up volume consistency checks as they both read the same config. Remember the commands above will only set those options until the NAS is rebooted.


Verifying the status of RAID arrays

We can check the status of the arrays on the system with:
1
cat /proc/mdstat
or
1
mdadm --detail /dev/md0
The output of this command will look like:

1
2
3
4
5
6
7
8
9
10
cat /proc/mdstat
Personalities : [raid1]
md0 : active raid1 sdb1[1] sda1[0]
104320 blocks [2/2] [UU]

md1 : active raid1 sdb3[1] sda3[0]
19542976 blocks [2/2] [UU]

md2 : active raid1 sdb4[1] sda4[0]
223504192 blocks [2/2] [UU]

Monday, September 29, 2014

Using PowerShell to export Active Directory Group Members to a CSV File

Hi all,
In this article I will discuss how I use the Get-ADGroupMember cmdlet to get a list of Active Directory Group members and dump it to a csv file. You will need to have the Active Directory Module for PowerShell installed to use this cmdlet. Once you have the  Active Directory Module for PowerShell installed you can open PowerShell as Administrator and type the following to import the module (module will be imported automatically when executing the “Get-ADGroupMember” cmdlet in PowerShell 3.0)

“Import-Module ActiveDirectory”

After you import the AD module type the following changing the identity to reflect your group name and the path to export group members to a csv file in that directory:

Get-ADGroupMember -identity “Name of Group” | select name | Export-csv -path C:\Output\Groupmembers.csv -NoTypeInformation

You should now have a list of members by display name in a csv file located at C:\Output\Groupmembers.csv. If you wanted to list out the users by samaccountname you could just change out “name” after the select statement with “samaccountname”.

Now lets say you are using nested groups. You will notice that your list will reflect the nested group name and no the members of the nested group. All you need to do in this case is add the -recursive parameter to enumerate all the nested group members and add them to the list. This would look as follows:

Get-ADGroupMember -identity “Name of Group” -recursive | select name | Export-csv -path C:\Output\Groupmembers.csv -NoTypeInformation

Wednesday, April 09, 2014

Split E-mail Address in Half in Excel

Username: (before '@' sign)
=LEFT(A1,FIND("@",A1)-1)

Domain: (after the '@' sign)
=RIGHT(A1,LEN(A1)-FIND("@",A1)+1)

...the +/- 1 adds or removes the @ symbol

Saturday, June 22, 2013

Shortcuts for the Spot Removal Tool in Lightroom

In Lightroom, we can now click-drag to create a Brush Spot.  As in previous versions a single click will create a circle spot and auto-find a source.
  • Tap “Q” to access the Spot Removal tool.  Shift + Q toggles between Clone and Heal modes.
  • Command -drag (Mac) | Control -drag (Win) creates a circle spot and allows you to drag to define the source.
  • Command + Option -drag (Mac) | Control + Alt -drag  (Win) creates a circle spot that scales from the center.
  • Command + Shift -drag(Mac) | Control  + Shift -drag (Win) creates a circle spot that scales from anchor.
  • Holding down Shift (before starting to paint with the Spot Removal tool) constrains the brush stroke to horizontal or vertical.
  • If you click to set a circle spot and then Shift + click in a different area Lightroom will connect the first spot with the new spot via a straight brush stroke (a great way to remove telephone lines).
  • To enlarge a brush spot after drawing, use the Size slider in the Spot Removal  options panel.
  • Backslash (/) – select new source for existing circle or brush spot.
  • Tap “H” to hide the interface.
  • Option -click  (Mac) | Alt  + (Win) -click  deletes a spot (the icon displays as a pair of scissors).
  • Option -click  (Mac) | Alt  + (Win) -drag over multiple spots will batch-delete spots.
  • Tap “A” to toggle the Visualize Spots feature (manual controls are found in the Toolbar)

Monday, May 06, 2013

How to Refresh or Reset Your Windows 8 PC Without the DVD

Original is here

 

How to Refresh or Reset Your Windows 8 PC Without the DVD

image

We have already shown you how you can use the new refresh and reset features in Windows 8 instead of formatting your PC, the problem is that you are required to insert your Windows DVD every time you want to use the features. Here’s how to do it without the DVD.

Refresh or Reset Your Windows 8 PC Without the DVD

The first thing you need to do is create a new folder on the root of your primary drive and call it “Windows8Files”



Now insert your DVD into your PC, or mount the ISO File and navigate to:
D:\sources
Copy the install.wim file off your DVD into the Windows8Files folder we just created.





Next we need to launch and administrative command prompt, so move your mouse to the bottom left of your screen and right-click then select Command Prompt (admin) from the context menu.



Now we need to run the following command: 

reagentc.exe /setosimage /path C:\Windows8Files /target C:\Windows /Index 1





Now you can refresh or reset you PC as normal, except it wont ask you to insert your DVD.